Referencia : AE0300
Stock en almacén europeo Estimación de llegada 6 Días
€192.51 Inc. IVA
Marca | Modelo | Descripción | Año | País |
---|
BT02 - Cargador de Batería y Tester del Alternador
Cargadores BC estan 100% fabricados en Italia por los especialistas en mantenimiento de batería. Con el uso de técnicos altamente experimentados y creativos, BC objetivo ofrece las mejores soluciones posibles para la recuperación, carga, desulfatación, mantenimiento y análisis de las baterías de plomo ácido.
El BT02 está diseñado específicamente con el taller en mente y utiliza la última tecnología para ofrecer un rendimiento óptimo para el usuario. Características de esta batería de alta calidad:
Todos los productos controladores de baterías All BC battery controller products come with a full three year warranty.
Technical Information
Voltage | 6/12 Volt |
---|---|
Estandards | SAE, EN, JIS, CA, DIN, IEC |
Tipos Batería | 6/12 V Lead Acid |
(Wet, Gel, MF, VRLA, AGM, Ca/Ca...) | |
Rango Voltímetro | 1.5 - 30 Volt |
Rango Capacidad Batería | 40 - 2000 CCA (SAE) |
40 - 2100 CCA (EN) | |
30 - 1500 CCA (IEC) | |
25 - 1300 CCA (DIN) | |
Lenguajes | English, Italian, French, German, |
Spanish, Portuguese, Japanese | |
Temperatura de funcionamiento | 0°C - 50°C |
Tolerancia | CCA ±5%, Voltaje± 0.05% |
Incluye Baterias | 6 x 1.5V - LR6 - AA |
Tamaño y Peso | 190x90x115 mm, 420 gr |
Longitud Cable | 1.75m |
Protecciones | Anti-shock shell |
Alta resistencia a los impactos |
Todos los cargadores AC están diseñados, fabricados y probados en Italia para cumplir con las regulaciones de la UE sobre seguridad y compatibilidad electromagnética.
The professional tester suitable for all 6/12V batteries (wet, gel, MF, AGM, VRLA)
from 40 to 2000 CCA (SAE), as well as for 12/24V cranking/charging electrical systems
Easy to use, it provides accurate and reliable results
Fast testing procedure, in few seconds the LCD display shows the test results
as well as a clear recommended action:
A. Good / Pass (battery in good conditions)
B. Good / Recharge
C. Recharge / Retest
D. Bad / Replace
E. Bad Cell / Replace
The device is also suitable to analyse deeply discharged batteries (Voltmeter range: 1.5V to 30V)
In order to minimise the battery drain during the execution of the test,
it's possible to select all the main industry international standards for batteries (SAE, DIN, EN, IEC or JIS)
Patented single load, dynamic resistance technology,
Protective rubber shell, high shock resistance
Practical ABS case for storing and transporting the unit